Showing 0–21 of 44 results
Protects the catalytic converter from clogging with soot. Cleans the injection system and the combustion chamber. The combustion improver works directly, which leads to an immediate, measurable reduction of the pollutants.
Special active solvent for fast and gentle cleaning of sensitive components of the air flow sensor in gasoline and diesel engines. The Cleaner also distinguishes itself by means of a very fast evaporation that is free of residues.
A combination of selected acetone-free solvents for the rapid, efficient cleaning and degreasing of components in motor vehicles and industrial applications. The low surface tension of this product gives it excellent penetration properties
Reduces hydraulic tappet noise. Cleans oil holes and ducts in the oil circuit and ensures that hydraulic tappet once again works optimally. Increases the operational reliability and driving comfort of the vehicle. Improves the function of timing chain tensioners filled with oil pressure, which can result in the reduction of timing chain noise.
Colloidal solid lubricant suspension based on molybdenum disulfide (MoS2) in mineral oil. Forms a high-load lubricating film on all rubbing and sliding surfaces. Reduces friction and ensures smoother running as well as greater engine economy.
Specially developed lubricating and separating spray made from synthetic and ceramic agents. Eliminates squealing noises that occur between brake pistons or contact surfaces and the brake lining.
Modern fuel additive with polyetheramine technology. Thanks to the use of active PEA, achieves the greatest cleaning effect in the fuel system as well as excellent piston and combustion chamber cleanliness. Considerably reduces the risk for damage to the engine due to low-speed pre-ignition (LSPI).
Additive specially developed for the latest hybrid engines. With outstanding cleaning effect adapted to the engine technology. Removes deposits and protects against corrosion. Stabilizes the fuel and protects against aging and oxidation.
For all gasoline engines, specifically when used with fuels slightly contaminated with water. Add to fuel whenever filling up. 300 ml sufficient for 60 l fuel.
For lubrication and corrosion protection of connections subject to high thermal stress. Chemical and petrochemical industries, power stations, ceramics industry, engineering and automotive construction. Particularly suitable for use with screw connections on exhaust manifolds, shock absorbers and chassis components.
Special lime soap-based grease which is compatible with plastics. Protects battery terminals and electrical contacts from corrosion and oxidation. For reliable starting as well as bright lights and longer battery life. Prevents acid damage, has good compatibility with plastics and prevents leakage currents. Prevents the contact resistance from increasing during operation and ensures lower loss than with untreated contacts. Labeling according to DIN 51502 K2G-30. Operating temperature range: -30 °C to +100 °C.
Especially for battery terminals and connections in vehicle electronics.
Mineral-oil free, grease-free release agent, lubricant and protective coating based on silicones dissolved in chlorine-free solvents. Protects, lubricates and insulates all surfaces by means of a transparent, permanent protective film.
The operating instructions of the transmission and bearing manufacturers must be followed.
VISCO PLUS FOR OIL FLUID 20/300ML
MOLYGEN MOTOR PROTECT FLUID 6/500ML
LM 47 LONG-LIFE GREASE+MOS2 12/100G LIQUI MOLY
GREASE MULTIPURPOSE 12/400G
Super-Diesel Additive
Desel Engine System Cleaner
